Skip to Content [alt-c]

Andrew Ayer



You are here: Andrew's SiteBlog2018January

January 21, 2018

Google's Certificate Revocation Server Is Down - What Does It Mean?

Earlier today, someone reported to the mailing list that they were unable to access any Google websites over HTTPS because Google's OCSP responder was down. David E. Ross says the problem started two days ago, and several Tweets confirm this. Google has since acknowledged the report. As of publication time, the responder is still down for me, though Ross reports it's back up. (Update: a fix is being rolled out.)

What's an OCSP Responder?

OCSP, which stands for Online Certificate Status Protocol, is the system used by SSL/TLS clients (such as web browsers) to determine if an SSL/TLS certificate is revoked or not. When an OCSP-using TLS client connects to a TLS server such as, it sends a query to the OCSP responder URL listed in the TLS server's certificate to see if the certificate is revoked. If the OCSP responder replies that it is, the TLS client aborts the connection. OCSP responders are operated by the certificate authority which issued the certificate. Google has its own publicly-trusted certificate authority (Google Internet Authority G2) which issues certificates for Google websites.

I thought Chrome didn't support OCSP?

You're correct. Chrome famously does not use OCSP. Chrome users connecting to Google websites are blissfully unaware that Google's OCSP responder is down.

But other TLS clients do use OCSP, and as a publicly-trusted certificate authority, Google is required by the Baseline Requirements to operate an OCSP responder. However, certificate authorities have historically done a bad job operating reliable OCSP responders, and firewalls often get in the way of OCSP queries. Consequentially, although web browsers like Edge, Safari, and Firefox do contact OCSP responders, they use "soft fail" and allow a connection if they don't get a well-formed response from the responder. Otherwise, they'd constantly reject connections that they shouldn't. (This renders OCSP almost entirely pointless from a security perspective, since an attacker with a revoked certificate can usually just block the OCSP response and the browser will accept the revoked certificate.) Therefore, the practical impact from Google's OCSP responder outage is probably very small. Nearly all clients are going to completely ignore the fact that Google's OCSP responder is down.

That said, Google operates some of the most heavily trafficked sites on the Internet. A wide variety of devices connect to Google servers (Google's FAQ for Certificate Changes mention set-top boxes, gaming consoles, printers, and even cameras). Inevitably, at least some of these devices are going to use "hard fail" and reject connections when an OCSP responder is down. There are also people, like the poster, who configure their web browser to use hard fail. Without a doubt, there are people who are noticing problems right now.

I thought Google had Site Reliability Engineers?

Indeed they do, which is why this incident is noteworthy. As I mentioned, certificate authorities tend to do a poor job operating OCSP responders. But most certificate authorities run off-the-shelf software and employ no software engineers. Some regional European certificate authorities even complain when you report security incidents to them during their months-long summer vacations. So no one is surprised when those certificate authorities have OCSP responder outages. Google, on the other hand, sets higher expectations.

Posted on 2018-01-21 at 19:35:36 UTC | Comments

January 10, 2018

How will Certificate Transparency Logs be Audited in Practice?

Certificate Transparency, the effort to detect misissued SSL certificates by publishing all certificates in public logs, only works if TLS clients reject certificates that are not logged. Otherwise, certificate authorities could just not log the certificates that they misissue. TLS clients accomplish this by requiring that a certificate be accompanied by a "signed certificate timestamp" (SCT), which is a promise by a log to include the certificate within 24 hours of the SCT's issuance timestamp. (This period is called the Maximum Merge Delay. It doesn't have to be 24 hours, but it is for all logs currently trusted by Chrome.) The SCT can be embedded in the certificate, the OCSP response (which the TLS server must staple), or the TLS handshake.

But an SCT is only a promise. What if the log breaks its promise and never includes the certificate? After all, certificate authorities promise not to issue bad certificates, but they do so in droves. We don't want to replace the problem of untrustworthy certificate authorities with the problem of untrustworthy Certificate Transparency logs. Fortunately, Certificate Transparency was designed to be verifiable, making it possible, in theory, for the TLS client to verify that the log fulfills its promise. Unfortunately, SCT verification seems to be a rather elusive problem in practice. In this post, I'm going to explore some of the possible solutions, and explain their shortcomings.

Direct Proof Fetching

A Certificate Transparency log stores its certificates in the leaves of an append-only Merkle Tree, which means the log can furnish efficient-to-verify cryptographic proofs that a certificate is included in the tree, and that one tree is an appendage of another. The log provides several HTTP endpoints for acquiring these proofs, which a TLS client can use to audit an SCT as follows:

  1. Use the get-sth endpoint to retrieve the log's latest signed tree head (STH). Store the returned tree head.

  2. Use the get-sth-consistency endpoint to retrieve a consistency proof between the tree represented by the previously-stored tree head, and the tree represented by the latest tree head. Verify the proof. If the proof is invalid, it means the new tree is not an appendage of the old tree, so the log has violated its append-only property.

  3. Use the get-proof-by-hash endpoint to retrieve an inclusion proof for the SCT based on the latest tree head. Verify the proof. If the proof is invalid, it means the log has not included the corresponding certificate in the log.

Note that steps 1 and 2 only need to be done periodically for each log, rather than once for every certificate validation.

There are several problems with direct proof fetching:

  1. Logs can't handle the load of every web browser everywhere contacting them for every TLS connection ever made.

  2. When the client asks for an inclusion proof in step 3, it has to reveal to the log which SCT it wants the proof for. Since each SCT corresponds to a certificate, and certificates contain domain names, the log learns every domain the client is visiting, which is a violation of the user's privacy.

  3. Since the log has up to 24 hours to include a certificate, the certificate might not be included at the time the client sees an SCT. Furthermore, even if 24 hours have elapsed, it would slow down the TLS client to retrieve a proof during the TLS handshake. Therefore, the client has to store the SCT and certificate and fetch the inclusion proof at some future time.

    This exposes the client to denial-of-service attacks, wherein a malicious website could try to exhaust the client's storage by spamming it with certificates and SCTs faster than the client can audit them (imagine a website which uses JavaScript to make a lot of AJAX requests in the background). To avoid denial-of-service, the client has to limit the size of its unverified SCT store. Once the limit is reached, the client has to stop adding to the store, or evict old entries. Either way, it exposes the client to flushing attacks, wherein an attacker with a misissued certificate and bogus SCT spams the client with good certificates and SCTs so the bad SCT never gets verified.

    Another question is what to do if the verification fails. It's too late to abort the TLS handshake and present a certificate error. Most users would be terribly confused if their browser presented an error message about a misbehaving log, so there needs to be a way for the client to automatically report the SCT to some authority (e.g. the browser vendor) so they know that the log has misbehaved and needs to be distrusted.

Proxied Auditing

To solve the scalability problem, clients can talk with servers operated by the client software supplier, rather than the logs themselves. (The client software supplier has to be comfortable operating scalable infrastructure; Google is, at least.)

For example, Chrome doesn't retrieve STHs and consistency proofs directly from logs. Instead, Google-operated servers perform steps 1 and 2 and distribute batches of STHs (called STHSets) to clients using Chrome's update system. Users have to trust the Google servers to faithfully audit the STHs, but since Chrome users already have to trust Google to provide secure software, there is arguably no loss in security with this approach.

Unfortunately, proxied auditing doesn't fully solve the privacy problem. Instead of leaking every domain the user visits to the log operator, requesting an inclusion proof leaks visited domains to the client software supplier.

DNS Proof Fetching

Chrome's solution to the privacy problem is to fetch inclusion proofs over DNS. Instead of making an HTTP request to the get-proof-by-hash endpoint, Chrome will make a series of DNS requests for sub-domains of which contain the parameters of the inclusion proof request (e.g. The name servers for respond with the inclusion proof inside TXT records.

Chrome believes DNS proof fetching is better for privacy because instead of their servers learning the Chrome user's own IP address, they will learn the IP address of the user's DNS resolver. If the user is using an ISP's DNS resolver, its IP address will be shared among all the ISP's users. Although DNS is unencrypted and an eavesdropper along the network path could learn what inclusion proofs the user is fetching, they would already know what domains the user is visiting thanks to the DNS queries used to resolve the domain in the first place.

However, there are some caveats: if a user doesn't share a DNS resolver with many other users, it may be possible to deanonymize them based on the timing of the DNS queries. Also, if a user visits a domain handled by an internal DNS server (e.g., that DNS query won't leak onto the open Internet, but the DNS query for the inclusion proof will, causing a DNS privacy leak that didn't exist previously. A privacy analysis is available if you want to learn more.

Chrome's DNS proof fetching is still under development and hasn't shipped yet.

Embedded Proofs

The second version of Certificate Transparency (which is not yet standardized or deployed) allows inclusion proofs to be presented to clients alongside SCTs (embedded in the certificate, OCSP response, or TLS handshake) saving the client the need to fetch inclusion proofs itself. That solves the problems above, but creates new ones.

First, inclusion proofs can't be obtained until the certificate is included in the log, which currently takes up to 24 hours. If clients were to require inclusion proofs along with SCTs, a newly issued certificate wouldn't be usable for up to 24 hours. That's OK for renewals (as long as you don't wait until the last minute to renew), but people are used to being able to get new certificates right away.

Second, clients can no longer choose the STH on which an inclusion proof is based. With direct or DNS proof fetching, the client always requests an inclusion proof to the latest STH, and the client can easily verify that the latest STH is consistent with the previous STH. When the client gets an embedded inclusion proof, it doesn't immediately know if the STH on which it is based is consistent with other STHs that the client has observed. The client has to audit the STH.

Unfortunately, the more frequently a log produces STHs that incorporate recently-submitted certificates, the harder it is to audit them. Consider the extreme case of a log creating a new STH immediately after every certificate submission. Although this would let an inclusion proof be obtained immediately for an SCT, auditing the new STH has all the same problems as SCT auditing that were discussed above. It's bad for privacy, since a log can assume that a client auditing a particular STH visited the domain whose certificate was submitted right before the STH was produced. And if the client wants to avoid making auditing requests during the TLS handshake, it has to store the STH for later auditing, exposing it to denial-of-service and flushing attacks.

STH Frequency and Freshness

To address the privacy problems of excessive STH production, CTv2 introduces a new log attribute called the STH Frequency Count, defined as the maximum number of STHs a log may produce in any period equal to the Maximum Merge Delay. The CT gossip draft defines a fresh STH to be one that was produced less than 14 days in the past. Clients could require that embedded inclusion proofs be based on a fresh STH. Then, with an STH Frequency Count that permits one STH an hour, there are only 336 fresh STHs at any given time for any given log - few enough that auditing them is practical and private. Auditing one of 336 STHs doesn't leak any information, and since the number of STHs is bounded, there is no risk of denial-of-service or flushing attacks.

It would also be possible for the client software supplier to operate a service that continuously fetches fresh STHs from logs, audits them for consistency, and distributes them to clients, saving clients the need to audit STHs themselves. (Just like Chrome currently does with the latest STHs.)

Unfortunately, this is not a perfect solution.

First, there would still be a delay before an inclusion proof can be obtained and a newly-issued certificate used. Many server operators and certificate authorities aren't going to like that.

Second, server operators would need to refresh the embedded inclusion proof every 14 days so it is always based on a fresh STH. That rules out embedding the inclusion proof in the certificate, unless the certificate is valid for less than 14 days. The server operator could use OCSP stapling, with the certificate authority responsible for embedding a new inclusion proof every 14 days in the OCSP response. Or the server operator's software could automatically obtain a new inclusion proof every 14 days and embed it in the TLS handshake. Unfortunately, there are no implementations of the latter, and there are very few robust implementations of OCSP stapling. Even if implementations existed, there would be a very long tail of old servers that were never upgraded.

One possibility is to make DNS proof fetching the default, but allow server operators to opt-in to embedded proofs, much like server operators can use HSTS to opt-in to enforced HTTPS. Server operators who run up-to-date software with reliable OCSP Stapling and who don't mind a delay in certificate issuance would be able to provide better security and privacy to their visitors. Maybe at some point in the distant future, embedded proofs could become required for everyone.

All of this is a ways off. CTv2 is still not standardized. Chrome still doesn't do any SCT auditing, and consequentially its CT policy requires at least one SCT to be from a Google-operated log, since Google obviously trusts its own logs not to break its promises. Fortunately, even without widespread log auditing, Certificate Transparency has been a huge success, cleaning up the certificate authority ecosystem and making everyone more secure. Nevertheless, I think it would be a shame if Certificate Transparency's auditability were never fully realized, and I hope we'll be able to find a way to make it work.

Posted on 2018-01-10 at 00:41:54 UTC | Comments